Amplificatore professionale classe D con DSP (Processore Digitale del Segnale). Indicato per service audio e installazione (pub, discoteche, hotel, sale conferenza, negozi ecc.). Modalità stereo: 2x300Wrms@8Ω, 2x500Wrms@4Ω,2x750Wrms@2Ω. Modalità Bridge: 1000W@8Ω, 1500W@4Ω (la modalità bridge non è consigliata a 2Ω). La sezione DSP può lavorare in modalità Stereo, Bridge, Input Y (due canali indipendenti, ad esempio per top e sub o due diversi speaker). - Filtro HP (40/125Hz). - Filtro LP (6,3/20kHz). - Equalizzatore parametrico 8 bande, per tarature precise e dettagliate del timbro e del controllo del feedback. - 2 limiter, utili per la protezione degli altoparlanti. - 2 delay indipendenti per il corretto allineamento temporale degli speakers. - Crossover regolabile Linkwitz/Riley per massimizzare l'accoppiamento top/sub. Raffreddamento tramite ventola, con velocità variabile automatica pilotata da sensore di temperatura. Protezione verso problemi di fornitura elettrica, surriscaldamento, corto circuito nel segnale in uscita. Connessioni XLR e jack di ingresso e uscita. Connessioni speakon e binding-post per il segnale amplificato. Rack standard 19". 2U Leggero, solo 4,9 kg.
Professional class D power amplifier with internal DSP. Suited for rental audio service and install applications (pubs, hotels, conference rooms, shops etc.). Stereo mode: 2x300Wrms@8Ω, 2x500Wrms@4Ω,2x750Wrms@2Ω. Bridge mode: 1000W@8Ω, 1500W@4Ω (not to be used at 2Ω). Complete DSP section with 3 working modes: Stereo, Bridge, Input Y (sub+top) - High Pass Filter 40/125Hz - Low Pass Filter: 6,3/20kHz - 8 band parametric equalizer for fine tuning and feedback control - 2 limiters for optimal speakers protection - 2 independent delays for speakers alignment - Adjustable crossover (Linkwitz/Riley 24dB/oct) for optimal sub/top combination Temperature controlled fan cooling. Protections against DC fault, high temperature, short circuits. XLR and jack connectors for signal input and output (easy daisy chaining) Speakon and binding-post power outputs Rack mountable 2U Light weight, less than 5 kg.
Amplificateur de puissance professionnel de classe D avec DSP interne. Idéal pour la location de services audio et les installations (pubs, hôtels, salles de conférences, magasins, etc.). Mode stéréo : 2x300 Wrms sous 8Ω, 2x500 Wrms sous 4Ω,2x750 Wrms sous 2Ω. Mode bridge : 1000 W sous 8 Ω, 1500 W sous 4 Ω (ne doit pas être utilisé sur 2 Ω). La section DSP peut fonctionner en mode Stéréo, Bridge, Input Y (deux canaux indépendants). - Filtre HP (40/125 Hz). - Filtre LP (6,3/20 kHz). - Égaliseur paramétrique à 8 bandes, pour un réglage parfait. - 2 limiteurs, pour une protection optimale des enceintes. - 2 délais indépendants pour un alignement correct 0 à 20 ms (0 à 6,86 m). - Crossover réglable (Linkwitz/Riley 24 dB/oct) pour une combinaison sub/top. Refroidissement par ventilateur avec vitesse variable commandée par un capteur de température. Protection contre les problèmes d'alimentation électrique, la surchauffe, les courts-circuits. Connexions XLR et Jack d'entrée/sortie. SpeakON et bornier de raccordement pour connecter une enceinte. Rack 19", 2 U pour un poids inférieur à 5 Kg.
Dati tecnici
- Professional DSP-controlled switch mode power amplifier.
- The high efficient class-D design guarantees high power, even at 2Ω!
- Stereo: 2x 300Wrms @ 8Ω ~ 2x 500Wrms @ 4Ω ~ 2x 750Wrms @ 2Ω
- Bridge: 1000Wrms @ 8Ω ~ 1500Wrms @ 4Ω
- Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, … )
- Complete DSP-section with:
- HPF: (40~125Hz) eliminates unwanted, energy absorbing frequencies.
- LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations.
- 8 Band parametric EQ: (100Hz~12.5kHz, Q:0.5~5, ±6db) for perfect tuning.
- 2 Limiters: for increased protection (threshold 0~-12dB).
- 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel.
- Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz)
- 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system)
- Temperature controlled fan cooling
- DC fault + high temperature + overload + short circuit protections
- Balanced XLR + jack inputs with possibility for daisy chaining of several inputs.
- SpeakON® + bind-post wire terminal outputs
General : Application |
Commercial, DJ & Club, Stage & Rental |
General : Dimensions (cm) |
48,2 x 8x8 x 28 cm |
General : Weight (kg) |
5.24 |
General : Color |
black |
General : Powerinput |
AC 100 - 240V, 50/60Hz |
General : Energy Label |
No |
General : Display |
LCD |
General : Fixation |
19" rack mountable |
General : RU |
2U |
General : IP rating |
indoor |
Audio : amplifier class |
D |
Audio : min. frequency (Hz) |
20 |
Audio : max. frequency (Hz) |
20000 |
Audio : S/N ratio (> dB) |
100 |
Audio : damping factor (>...) |
200 |
Audio : max. output channels |
2 |
Audio : Wrms 2Ω stereo, per channel |
750 |
Audio : Wrms 4Ω stereo, per channel |
500 |
Audio : Wrms 8Ω stereo, per channel |
300 |
Audio : Wrms 4Ω bridge |
1500 |
Audio : Wrms 8Ω bridge |
1000 |
Audio : functions |
fixed crossover, bridge mode, DSP, limiter |
Connections : input |
3 pin XLR, jack, IEC |
Connections : output |
speakon |