B00266 - DIGIT 2K2

Power amplifier, class D, 2x 1100Wrms / 4Ω   
NON DISP.

823.50€ Prezzo di listino (IVA esclusa)

Descrizione

DIGIT 2K2 è un nuovo amplificatore di classe D, piccolo ma potente, occupa solo 1U rack, pesa veramente poco (5kg!), ha una dissipazione del calore molto bassa e diverse combinazioni di potenza d'uscita. Ci sono due ingressi XLR con due output XLR per fare da LINK nel caso si voglia mandare il segnale audio ad un altro amplificatore, e tre uscite SPEAKON per poter usare l'amplificatore in tre modalità diverse: MONO/STEREO/BRIDGE. In base alla modalità scelta cambia la potenza d'uscita: da 2 canali x 650Wrms a 1 canale x 2200Wrms (consulta la scheda tecnica per maggiori dettagli). Porta con te questo nuovo piccolo amplificatore e non te ne pentirai.

DIGIT 2K2 is a new powerful class D amplifier, it fits in a 1U rack, it is very light (5 kg!), has a very low heat dissipation and different power output combinations. There are 2 XLR inputs, both with an XLR output link, in case you want to send the audio signal to another amplifier, and three speakON outputs, so you can use the amplifier in three different ways: mono/stereo/bridge. The power output changes based on what you choose: from 2 channelsx650Wrms/8ohm to 1channelx2200Wrms/4ohm (see technical specifications). Carry this small new amplifier with you and you won't regret it.

DIGIT 2K2 est un amplificateur de classe D, petit mais puissant qui occupe seulement 1U pour un poids de 5,5 kg, il a une très faible dissipation thermique et différentes combinaisons de puissance de sortie. L’amplificateur est doté de deux entrées XLR avec deux sorties LINK XLR pour envoyer le signal audio à un autre amplificateur, et de trois sorties SPEAKON pour trois modes différents : MONO/STEREO/BRIDGE. Selon le mode choisi, la puissance de sortie change : de 2 canaux x 650 Wrms/8Ω à 1 canal x 2200 Wrms/8Ω (voir la fiche technique pour plus de détails). Cet amplificateur ne vous décevra jamais.

Dati tecnici

  • A real breakthrough in professional amplifier technology: Synq introduces a new range of CLASS-D AMPLIFIERS with exceptional power and competitive pricing!
  • The extremely high efficiency, reduced power waste and very low heat dissipation are the main advantages of these PWM-amplifiers!
  • Incredible space savings for mobile applications: enclosure only 1unit high!
  • Incredible low weight: only 5,5kg!
  • Extremely high power output: 2x 1100Wrms @ 4Ω; 2x 650Wrms @ 8Ω
  • Output in bridge mode: 1x 2200Wrms @ 8Ω
  • All the protections you can think of for professional use:
    • Signal + current limiters
    • Overload protection
    • Short circuit current protection
    • DC protection
    • Thermal protection
    • AC, VHF protection
    • Soft start
  • Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies.
  • 3 different working modes: stereo, bridge mode, mono mode (inputs linked)
  • Input sensitivity: 26dB / 32dB / 1,4V
  • Balanced in/outputs on XLR
  • 2 Speakon connectors (left and right outputs)
  • 1 separate output for bridge mode