B00267 - DIGIT 3K6

Power amplifier, class D, 2x 1800Wrms / 4Ω   
NON DISP.

928.50€ Prezzo di listino (IVA esclusa)

Descrizione

DIGIT 3K6 è un piccolo ma potente amplificatore di classe D, che occupa solo 1U rack, pesa 5kg e ha una bassa dissipazione del calore. Ci sono due ingressi XLR con due output XLR che fanno da LINK nel caso in cui si voglia mandare il segnale audio a un altro amplificatore. Tre uscite SPEAKON ti permettono di usarlo in tre modalità diverse: MONO/STEREO/BRIDGE. Ha diverse combinazioni di potenza d'uscita che cambiano in base alla modalità scelta: da 2 canali x 1050Wrms a 1 canale x 3600Wrms (consulta la scheda tecnica per maggiori dettagli).

DIGIT 3K6 is a compact but powerful class D amplifier, which fits in a 1U rack, it weighs 5 kg and has very low heat dissipation. There are 2 XLR inputs both with an XLR output link, wich give you the possibility to send the audio signal to another amplifier. Three speakON outputs will help you to use the amplifier in three different ways: mono/stereo/bridge. The amplifier has different power output combinations. They change based on what you choose: from 2 channelsx1050Wrms/8ohm to 1channelx3600Wrms/4ohm (see technical specifications).

DIGIT 3K6 est un amplificateur de classe D, petit mais puissant qui occupe seulement 1U pour un poids de 5,6 kg, il a une très faible dissipation thermique et différentes combinaisons de puissance de sortie. L’amplificateur est doté de deux entrées XLR avec deux sorties LINK XLR pour envoyer le signal audio à un autre amplificateur, et de trois sorties SPEAKON pour trois modes différents : MONO/STEREO/BRIDGE. Selon le mode choisi, la puissance de sortie change : de 2 canaux x 1050 Wrms/8Ω à 1 canal x 3600 Wrms/8Ω (voir la fiche technique pour plus de détails).

Dati tecnici

  • A real breakthrough in professional amplifier technology: Synq introduces a new range of CLASS-D AMPLIFIERS with exceptional power and competitive pricing!
  • The extremely high efficiency, reduced power waste and very low heat dissipation are the main advantages of these PWM-amplifiers!
  • Incredible space savings for mobile applications: enclosure only 1unit high!
  • Incredible low weight: only 5,6kg!
  • Extremely high power output: 2x 1800Wrms @ 4Ω; 2x 1050Wrms @ 8Ω
  • Output in bridge mode: 1x 3600Wrms @ 8Ω
  • All the protections you can think of for professional use:
    • Signal + current limiters
    • Overload protection
    • Short circuit current protection
    • DC protection
    • Thermal protection
    • AC, VHF protection
    • Soft start
  • Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies.
  • 3 different working modes: stereo, bridge mode, mono mode (inputs linked)
  • Input sensitivity: 26dB / 32dB / 1,4V
  • Balanced in/outputs on XLR
  • 2 Speakon connectors (left and right outputs)
  • 1 separate output for bridge mode