menu
B00268 - DIGIT 1K0

Power amplifier, class D, 2x 540Wrms / 4Ω   
NON DISP.

392.30€ Prezzo di listino (IVA esclusa)

Descrizione
ITENFR

DIGIT 1K0 è un nuovo amplificatore di classe D. Ci sono due ingressi XLR con due output XLR per fare da LINK nel caso in cui si voglia mandare il segnale audio a un altro amplificatore, e tre uscite SPEAKON per poter usare l'amplificatore in tre modalità diverse: MONO/STEREO/BRIDGE. In base alla modalità scelta cambia la potenza d'uscita: da 2 canali x 300Wrms a 1 canale x 1080Wrms (consulta la scheda tecnica per maggiori dettagli). Compatto (occupa 1U rack e pesa solo 5kg) ma molto potente che, grazie alla sua nuova tecnologia, aiuta a diminuire il consumo energetico e la dissipazione del calore.

DIGIT 1K0 is a new class D amplifier. There are 2 XLR inputs, both with an XLR output link, in case you want to send the audio signal to another amplifier, and three speakON outputs, so you can use the amplifier in three different ways: mono/stereo/bridge. The power output changes based on what you choose: from 2 channelsx300Wrms/8ohm to 1channelx1080Wrms/4ohm (see technical specifications). Compact sized (it fits in a 1U rack and weighs 5 kg) yet powerful. with extremely high efficiency that helps decrease energy consumption and very low heat dissipation.

Amplificateur CLASSE-D très efficace dans un boîtier compact et léger 2x 540Wrms / 4ohm.

Dati tecnici

  • A real breakthrough in professional amplifier technology: Synq introduces a new range of CLASS-D AMPLIFIERS with exceptional power and competitive pricing!
  • The extremely high efficiency, reduced power waste and very low heat dissipation are the main advantages of these PWM-amplifiers!
  • Incredible space savings for mobile applications: enclosure only 1unit high!
  • Incredible low weight: 3,3kg!
  • Extremely high power output: 2x 540Wrms @ 4ohms; 2x 300Wrms @ 8ohms
  • Output in bridge mode: 1x 1080Wrms @ 8ohms
  • All the protections you can think of for professional use:
    • Signal + current limiters
    • Overload protection
    • Short circuit current protection
    • DC protection
    • Thermal protection
    • AC, VHF protection
    • Soft start
  • Very powerful bass response, also perfect for subwoofers!
  • Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies.
  • 3 different working modes: stereo, bridge mode, mono mode (inputs linked)
  • Balanced in/outputs on XLR
  • 2 Speakon connectors (left and right outputs)
  • 1 separate output for bridge mode
General : Application Commercial, DJ & Club, Stage & Rental
General : Dimensions (cm) 48.2 x 4.4 x 21.5 cm
General : Weight (kg) 3
General : Color black
General : Powerinput AC 240V, 50Hz
General : Energy Label No
General : Power consumption W 1200
General : Display none
General : Fixation 19" rack mountable
General : RU 1U
General : IP rating indoor
Audio : amplifier class D
Audio : min. frequency (Hz) 5
Audio : max. frequency (Hz) 36000
Audio : damping factor (>...) 280
Audio : max. output channels 2
Audio : Wrms 4Ω stereo, per channel 540
Audio : Wrms 8Ω stereo, per channel 300
Audio : Wrms 8Ω bridge 1080
Audio : functions bridge mode, limiter
Connections : input 3 pin XLR, Schuko CEE 7/7
Connections : output 3 pin XLR, speakon