B08108 - SE-1100

Professional audio amplifier 2 x 550 W RMS @ 4 ohm   

446.20€ Prezzo di listino (IVA esclusa)

Descrizione

Amplificatore finale in Classe-D da 2 x 550 WRMS, leggero (solo 3,85 kg) e caratterizzato da una potente riproduzione delle basse frequenze e da alte cristalline. 

Rapporto prestazioni / prezzo senza precedenti! L'altissima efficienza, il ridotto consumo di energia e la bassissima dissipazione del calore sono i principali vantaggi di questo amplificatore compatto che, grazie alla grande riserva di potenza, agli efficaci limitatori e alle protezioni può essere utilizzato in diverse situazioni. 

Caratteristiche principali

  • Salva spazio nelle applicazioni mobili: la profondità dello chassis da 1,5 U è di soli 21 cm!
  • Peso incredibilmente ridotto, solo 3,85 kg!
  • Potenza, stereo:
    • 2 x 300 WRMS a 8 ohm
    • 2 x 550 WRMS a 4 ohm
  • Potenza, mono a ponte:
    • 1 x 1100 WRMS a 8 ohm
  • Vasta gamma di protezioni per l'ambiente professionale:
    • Segnale inudibile + limitatore di corrente
    • Protezione da sovraccarico
    • Protezione cortocircuito
    • Protezione in continua
    • Protezione termica
    • Protezione AC / VHF
    • Avvio graduale
  • 3 diverse modalità di lavoro: stereo, bridge mode, mono (ingressi collegati)
  • Sensibilità d'ingresso: 0,7 / 1 / 1,4 V
  • Ingressi / uscite bilanciati su XLR
  • 2 connettori compatibili speakON (uscite sinistra e destra)
  • 1 uscita separata per modalità bridge

Ambiti di utilizzo

  • Discoteche
  • Club
  • Teatri
  • Mobile audio
  • PA
  • Noleggio etc.

2 x 550 WRMS Class-D power amplifier, lightweight (only 3.85 kg) and featuring powerful low-frequency reproduction and crystal-clear highs.

Unprecedented price-performance ratio! Extremely high efficiency, low power consumption, and extremely low heat dissipation are the main advantages of this compact amplifier. Thanks to its large power reserves, effective limiters, and protections, it can be used in a variety of situations.

Main features

  • Space-saving for mobile applications: the 1.5 U chassis is only 21 cm deep!
  • Incredibly lightweight, just 3.85 kg!
  • Stereo power:
    • 2 x 300 WRMS at 8 ohms
    • 2 x 550 WRMS at 4 ohms
  • Mono bridged power:
    • 1 x 1100 WRMS at 8 ohms
  • Extensive protection for professional environments:
    • Inaudible signal + current limiter
    • Overload protection
    • Short circuit protection
    • DC protection
    • Overheat protection
    • AC / VHF protection
    • Soft start
  • 3 different operating modes: stereo, bridge mode, mono (linked inputs)
  • Input sensitivity: 0.7 / 1 / 1.4 V
  • Balanced XLR inputs / outputs
  • 2 SpeakON-compatible connectors (left and right outputs)
  • 1 separate output for bridge mode

Areas of use

  • Discotheques
  • Clubs
  • Theaters
  • Mobile audio
  • PA
  • Rentals, etc.

Amplificateur en classe D de 2 x 550 WRMS, léger (seulement 3,85 kg) et caractérisé par une reproduction puissante des basses fréquences et des aigus cristallins. 

Rapport performances/prix sans précédent ! Son rendement très élevé, sa faible consommation d'énergie et sa très faible dissipation thermique sont les principaux avantages de cet amplificateur compact qui, grâce à sa grande réserve de puissance, ses limiteurs efficaces et ses protections, peut être utilisé dans différentes situations. 

Caractéristiques principales

  • Gain de place dans les applications mobiles : la profondeur du châssis 1,5 U n'est que de 21 cm !
  • Poids incroyablement réduit, seulement 3,85 kg !
  • Puissance, stéréo :
    • 2 x 300 WRMS à 8 ohms
    • 2 x 550 WRMS à 4 ohms
  • Puissance, mono bridge :
    • 1 x 1100 WRMS à 8 ohms
  • Large gamme de protections pour l'environnement professionnel :
    • Signal inaudible + limiteur de courant
    • Protection contre les surcharges
    • Protection contre les courts-circuits
    • Protection continue
    • Protection thermique
    • Protection AC / VHF
  • Démarrage progressif
  • 3 modes de fonctionnement différents : stéréo, mode bridge, mono (entrées connectées)
  • Sensibilité d'entrée : 0,7 / 1 / 1,4 V
  • Entrées / sorties symétriques sur XLR
  • 2 connecteurs compatibles speakON (sorties gauche et droite)
  • 1 sortie séparée pour le mode pont

Domaines d'utilisation

  • Discothèques
  • Clubs
  • Théâtres
  • Audio mobile
  • Sonorisation
  • Location, etc.

Dati tecnici

Technical characteristics

Series SE
Color black
Power input 230 VAC 50 Hz
Power consumption 1200 W
Fixation 19" rack mountable
RU 1.5 U
IP rating indoor
Amplifier  Class-D
Frequency response 20 Hz - 20 kHz
SNR 103 dB
Damping factor 400
No of channels 2
WRMS 4 ohm stereo, per channel 550 W
WRMS 8 ohm stereo, per channel 300 W
WRMS 8 ohm bridge 1100 W
Functions bridge mode, limiter
Input 3-pin XLR, powerCON
Output 3-pin XLR, speakON
Dimensions 48.2 x 6.6 x 21.5 cm
Weight 3.85 kg