B04638 - BT-NODE28 3PIN

Artnet node with 8 XLR 3pin DMX ports   
NON DISP.

725.50€ Prezzo di listino (IVA esclusa)

Descrizione

Nodo ArtNet all-in-one con 8 porte DMX XLR a 3 poli completamente configurabili. Le 8 porte DMX possono essere configurate come in o out, come input in modalità normale o backup, come output in modalità LTP, HTP, RDM o zero. Impostazioni personali dell'utente e opzioni di routing memorizzabili. Sono disponibili più opzioni di routing predefinite: 4 ingressi DMX con 4 uscite clone locali per DMX e uscita Art-Net, 8 uscite DMX dall'ingresso Art-Net con linea di backup. Diverse combinazioni di Merger in entrambe le direzioni: DMX in + Art-Net su Art-net o su output DMX (LTP o HTP), 2 ingressi DMX su Art-Net (LTP o HTP). Modalità splitter DMX multiple: 1 ingresso DMX a 7 uscite DMX isolate, 2 splitter individuali ciascuno con 1 ingresso DMX a 3 uscite. Isolamento elettrico al 100%. Facile configurazione con display LCD OLED. Frame rate di ciascuna porta regolabile da 10ms a 40ms. Due porte Ethernet 10 / 100Mbps (connettori Neutrik RJ45 Ethercon). Switch Ethernet integrato con funzione di bypass automatico in caso di guasto hardware.

All-in-one ArtNet Node solution with 8 highly configurable XLR 3 pin DMX ports. The 8 DMX ports can all be configured as in or outputs, as input in normal or backup mode, as output in LTP, HTP, RDM or zero mode. Storable user personal settings and routing options. Multiple pre-defined routing options available: 4 DMX inputs with 4 local clone outputs DMX and Art-Net output, 8 DMX outputs from Art-Net input with backup line. Different merger combinations in both directions: DMX in + Art-Net universe to Art-net or physical DMX output (LTP or HTP), 2 DMX inputs to Art-Net (LTP or HTP). Multiple DMX splitter modes: 1 DMX input to 7 isolated DMX outputs, 2 individual splitters each with 1 DMX input to 3 isolated DMX outputs. 100% electrical isolation between all in/out. Easy setup with OLED LCD display. Frame rate of each port adaptable from 10ms to 40ms. Two 10/100Mbps Ethernet ports (Neutrik RJ45 Ethercon connectors) Built-in Ethernet switch with automatic bypass function in case of hardware failure.

Node Art-Net, une solution « Tout En Un » avec 8 ports XLR DMX 3 broches totalement configurables. Les 8 ports DMX peuvent être aussi bien configurés en entrée que en sortie : en entrée en mode normal ou en mode sauvegarde et en sortie en mode LTP, HTP, RDM ou mode zéro. De multiples configurations pré-définies de routing sont proposées mais il est aussi possible d’enregistrer vos propres configurations de routing. Les configurations proposées sont : 4 entrées DMX avec 4 sorties DMX clonées et sortie Art-Net. 8 sorties DMX combinées à l’entrée Art-Net et ligne de secours. différentes configurations de « Merger » dans les 2 sens : entrées DMX + univers Art-Net vers une sortie Art-Net ou sortie DMX physique (LTP ou HTP), 2 entrées DMX vers Art-Net (LTP ou HTP). nombreux modes de « Splitter » : 1 entrée DMX vers 7 sorties DMX isolées, ou 2 x Splitters individuels avec 1 entrée DMX et 3 sorties DMX isolées. Isolation électrique 100% entre toutes les entrées/sorties. Ecran OLED LCD pour une navigation facile à travers les menus de configuration. Fréquence adaptable pour chaque port entre 10ms et 40ms. 2 connecteurs Neutrik Ethercon RJ45 10/100Mbps. Le commutateur Ethernet dispose d’une fonction automatique de dérivation en cas de défaillance matérielle.

Dati tecnici

General : Dimensions (cm) 48;3 x 4.4 x 15 cm
General : Weight (kg) 2.92
General : Powerinput AC 100 - 240V, 50/60Hz
General : Energy Label No
General : Power consumption W 7
General : Color black
General : Display LCD
General : Fixation 19" rack mountable
General : RU 1U
General : IP rating indoor
Control : programmable No
Control : upgradable software No
Control : maximum DMX channels 8
Connections : input 3 pin XLR, IEC, artnet, RJ45
Connections : output 3 pin XLR, artnet, RJ45